Sr. No. |
Particulars |
|
Specification for FAN Mukta Wind Ventilator
600mm Throat Dia. |
1) |
Vanes |
Vanes
made out of FRP (Glass Fibre Reinforced Plastic)
UV Stabilized Isopthalic Resin . No. of Vanes:
42 nos.
Thickness of vanes: 2mm (+/-0.2mm) |
2) |
Top Plate |
Top
Plate made out of FRP(Glass Fibre Reinforced
Plastic) UV Stabilized Isopthalic Resin
.Dia. Of Top Plate: 500mm (+/-5mm)
Thickness of Top Plate: 2mm (+/-0.2mm) |
3) |
Bottom Ring |
Bottom Ring made out of FRP(Glass Fibre
Reinforced Plastic) UV Stabilized
Isopthalic Resin.Dia. Of Bottom Ring:
600mm (+/-5mm) Thickness of Bottom
Ring: 2mm (+/-0.2mm) |
4) |
Fan Spoke Assembly |
Fan
Spoke assembly made out of SS 316 L Rod. Dia. of
Fan Spoke Rod: 5mm. |
5) |
Bottom Ring Cross Bracket |
Bottom Ring Cross Bracket made out of SS 316 L
Flat.
Size of Cross Bracket Flat: 18 X 3mm |
6) |
Shaft |
Shaft
made out of SS316 L Rod 12 mm Dia. |
7) |
Shaft Casing |
Shaft
Casing made out of (UV Stabilised) U-PVC pipe,
32mm Dia.(min), 2 mm Thk (min.) |
8) |
Shaft Bottom Cap |
Shaft
Bottom Cap made out of Polypropylene ( PP ),
Internal Dia- 34mm, Outer Dia-36mm,
1mm Thk. |
9) |
Bearing |
2
nos. Permanently sealed & lubricated Bearing of
Type 6001 ZZ. |
10) |
Rivet |
SS
304 |
|
Specification for BASE PLATE for Mukta Wind
Ventilator 600mm Throat Dia. |
1) |
FRP
(Glass Fibre Reinforced Plastic) UV
Stabilized Isopthalic Resin . Translucent Type.
Confirming to match existing roof sheet profile.
Size of Base Plate: 1.050 W X 1.6 L Mtrs.
Height of Throat: Higher side-
400mm; Lower side- 310mm
( +/- 5mm)
Top Dia of Throat: 590mm ( +/- 5mm)
Thickness of Base Plate: 2mm (+/- 0.3 mm) |
